SUMO 2" Lift Kit and Rear Sub Frame Spacer Kit F3R3SA9
Complete Front and Rear Block Set and Sub Frame Spacer Kit
These 2.0 Inch blocks attach to the top of the struts, in effect lowering the struts mounting point. The strut mounting locations have been offset to maintain the true geometry of the strut location (Caster and Camber corrected). This means all the factory alignment settings are maintained and "Camber Bolts" are NOT required.
By installing the Rear Sub-Frame Spacer Kit we retain the proper arc of the rear bearing housing (knuckle, spindle). This prevents the rear tire moving forward and keeps it "centered" in the rear wheel well.
Manufactured from Laser Cut, 3/16 (.188) thick Steel and Professionally Welded. Includes all hardware for installation.
Powder Coated our Standard Satin Black or Custom Colors are available for an additional charge.
*We suggest you inspect all suspension components thoroughly when installing this kit. Specifically the struts, ball joints, tie rods, axle boots, etc.
*This kit will require a proper alignment when finished.
*Kit must be registered with our warranty department once installation is completed or warranty will be void.
*By purchasing this kit you accept full responsibility.
*As with all of our products we advise they be installed by a "qualified" installer. If you lack the proper tools, knowledge, ability, and common sense, PLEASE FIND A QUALIFIED INSTALLATION FACILITY!